DG4V-3 Solenoid Operated Hydraulic Directional Control Valve
Reliable hydraulic flow switching for industrial machinery, hydraulic power units and automated equipment.
A directional valve plays an essential role in determining how hydraulic oil moves through a system. The DG4V-3 series is designed to switch hydraulic flow paths through electromagnetic spool actuation, helping control the movement of cylinders and hydraulic motors.
What Does the DG4V-3 Hydraulic Valve Do?
The DG4V-3 is a solenoid operated directional control valve used to regulate the direction of hydraulic fluid within a circuit. When an electrical signal energizes the solenoid, electromagnetic force moves the internal spool to a selected position. This changes the connection between the pressure, tank and actuator ports.
Depending on the selected spool configuration, the valve can direct pressurized oil to either side of a hydraulic cylinder or motor, reverse actuator movement, or block and connect specific flow passages.
For equipment manufacturers and hydraulic maintenance companies, selecting the correct directional valve helps ensure that the hydraulic circuit responds properly to electrical control signals and operating requirements.
How Does a Solenoid Directional Valve Work?
The operation of the DG4V-3 can be understood through three basic stages:
Electrical Signal
The control system sends an electrical signal to the solenoid coil, creating an electromagnetic field.
Spool Movement
The electromagnetic force shifts the valve spool, changing the internal hydraulic passages.
Flow Direction
Hydraulic oil is redirected through the selected ports to control the connected actuator.
The actual switching behavior depends on the selected spool arrangement, solenoid configuration and electrical control method.
Valve Design, Ports and Mounting Interface
The DG4V-3 belongs to the compact directional valve category commonly used with NG6 / CETOP 3 mounting arrangements. Its subplate-mounted construction allows installation in compatible hydraulic manifolds and power unit assemblies.
Port functions are described for a typical four-way directional valve arrangement. Actual internal connections depend on the selected spool code.
Choose the Right DG4V-3 Valve Configuration
Different hydraulic circuits require different switching functions. Before purchasing a DG4V-3 solenoid valve, it is important to identify the required spool arrangement and electrical configuration.
Spool Function
Different spool arrangements determine how P, T, A and B ports connect in each operating position.
Solenoid Arrangement
Single and double solenoid configurations are available across different model variants.
Coil Voltage
AC and DC coil options depend on the exact model code and electrical specification.
Return Mechanism
Spring return and other available switching arrangements should be checked against the selected valve configuration.
Where Is the DG4V-3 Directional Valve Used?
A hydraulic directional control valve is selected according to the operating requirements of the complete hydraulic circuit. The DG4V-3 format is commonly associated with industrial hydraulic control applications.
Hydraulic Power Units
Controls hydraulic oil distribution in power packs used for industrial machinery and equipment.
Machine Tools
Supports directional switching for hydraulic clamping, positioning and machine movement functions.
Hydraulic Presses
Used in hydraulic circuits that require controlled actuator movement during pressing operations.
Automated Production Lines
Works with electrical control systems to switch hydraulic functions in automated equipment.
Industrial Handling Equipment
Provides directional control for hydraulic lifting, positioning and material handling mechanisms.
Hydraulic Test Systems
Can be incorporated into suitable test circuits requiring electrically operated flow switching.
DG4V-3 Product Specifications
The following information provides a general product identification reference. Confirm exact operating limits and options using the complete model number and manufacturer documentation.
How to Select a Suitable DG4V-3 Replacement Valve
Replacing a hydraulic solenoid directional valve requires more than matching its external appearance. Differences in spool function, coil voltage or mounting specifications may affect the performance of the entire hydraulic circuit.
01. Check the Complete Model Code
Provide the full model number and nameplate information to identify the correct valve configuration.
02. Confirm the Spool Function
Check the required hydraulic flow paths and neutral position before selecting a replacement directional valve.
03. Verify Electrical Specifications
Confirm the coil voltage, current type, connector and electrical control requirements.
04. Compare Installation Requirements
Check mounting interface, port arrangement, operating pressure and flow requirements against the original equipment specifications.
Frequently Asked Questions About DG4V-3
Q1. What is a DG4V-3 solenoid operated directional valve?
It is an electrically actuated hydraulic directional control valve that changes oil flow paths to control hydraulic cylinders and motors.
Q2. What does NG6 or CETOP 3 mean?
NG6 and CETOP 3 refer to a common mounting size and interface standard for compact hydraulic valves. Always verify the actual mounting dimensions.
Q3. What is the difference between single and double solenoid valves?
A single-solenoid arrangement typically uses one electrical actuator with a return mechanism, while a double-solenoid arrangement uses two solenoids to shift the spool in opposite directions.
Q4. Are different coil voltages available for DG4V-3?
Different AC and DC coil specifications are available depending on the particular model. Confirm the required voltage before ordering.
Q5. Can DG4V-3 replace another CETOP 3 hydraulic valve?
Potentially, but mounting compatibility alone is insufficient. Spool function, pressure rating, flow capacity, electrical specifications and port connections must also match.
Q6. What information is needed for a DG4V-3 quotation?
The complete model code, required quantity, coil voltage, spool configuration and application details are helpful for quotation and product confirmation.
Q7. Where are DG4V-3 hydraulic directional valves commonly used?
Typical applications include hydraulic power units, machine tools, industrial presses, manufacturing equipment and automated hydraulic systems.
Q8. How can I identify the correct replacement model?
Send a clear nameplate photo and the complete model number. Our team can help review the valve configuration and check the replacement requirements.
Looking for DG4V-3 Hydraulic Directional Control Valves?
Whether you need a hydraulic valve for equipment maintenance, system integration or replacement sourcing, our team can assist with model identification and quotation inquiries. Send us your required model, quantity and technical specifications.
Barry Bao
WhatsApp: +86 176-8125-8341
Email: barry@sunrayhydraulic.com
Tings
WhatsApp: +86 183-5819-2954
Email: tings@pxhyds.com
Connor
WhatsApp: +86 185-9389-0198
Email: connor@sunrayhydraulic.com
Your Hydraulic Component Sourcing Partner
Contact us for product information, model verification and quotation support.
Hot Tags: danfoss vickers dg4v-3-2c-m-u-b6-60 solenoid operated hydraulic directional control valve for industrial hydraulic systems, China danfoss vickers dg4v-3-2c-m-u-b6-60 solenoid operated hydraulic directional control valve for industrial hydraulic systems manufacturers, suppliers, factory, gaskets, hydraulic valve durability, hydraulic valve fixtures, hydraulic valve machining, hydraulic valve rings for cylinders, refurbished hydraulic valves
