Rexroth A2FE180 - Industrial Mixer and Tunnel Duty Motor
Rexroth A2FE180 fixed displacement motors serve industrial mixers and tunnel machinery that run demanding duty cycles around the clock.
The 180 cm³ bent-axis core is pressure-rated to 400 bar peak and built for continuous heavy service.
Product Introduction
With 180 cm³ per revolution it delivers the torque to turn thick mixes and drive heavy auxiliary equipment without thermal derating.
Confirm exact figures for your order code against RE 91053; commissioning guidance is included with project orders.
Technical Specifications
Displacement
180 cm³/rev
Nominal Pressure
350 bar
Peak Pressure
400 bar
Max. Speed
~2,200 rpm
Torque @ 350 bar
~1,003 N·m
Design
Axial Piston, Bent-Axis
Speed and torque figures are typical catalog values (RE 91053). Verify exact numbers for your order code before final design.
Core Advantages
✓ Around-the-Clock Duty
Built for continuous industrial running.
✓ Heavy Mixing Torque
Torque to turn thick mixes reliably.
✓ Tunnel-Grade Build
Robustness for rough site conditions.
✓ Low Wear Design
Fewer moving parts, longer intervals.
✓ Application Engineering
Sizing help for mixer and tunnel drives.
Key Selling Points
Sustained torque - turns heavy mix cycles without derating
Rugged construction - survives tunnel-site abuse
Predictable speed - keeps process repeatable
Simple maintenance - suits hard-to-reach spots
Warranty coverage - matches demanding duty use
Application Industries
Application Equipment
▸ Tunnel boring auxiliary drives
▸ Industrial mixer drives
▸ Segment erector drives
▸ Slurry pump drives
▸ Conveyor extensors
▸ Rail maintenance machines
Frequently Asked Questions
Q1. Can the A2FE180 run around the clock?
Yes, it is built for continuous industrial duty with proper cooling.
Q2. What torque does it produce?
About 1,003 N·m theoretical at 350 bar.
Q3. Is it used in tunnel projects?
Commonly on auxiliary drives of tunnel machines and slurry systems.
Q4. What is the service class?
Continuous heavy-duty, with periodic inspection recommended.
Q5. Do you offer commissioning help?
Yes, remote commissioning guidance is included with project orders.
Q6. What spares do you stock?
Seal kits, bearings and wear parts for standard codes.
Q7. Can it replace a worn A2FM unit?
Compare flange and shaft codes; most direct replacements are straightforward.
Q8. What export documents come with it?
Invoice, packing list, bill of lading and certificate of origin.
Hot Tags: rexroth a2fe180 axial motor | fixed displacement heavy duty, China rexroth a2fe180 axial motor | fixed displacement heavy duty manufacturers, suppliers, factory, A2FE61 Motor, A2FM Motor, A2FM63 61W VBB100 Hydraulic Motor of Rexroth for Hoisting Machinery in Stock, A6VE055EP200P000E 65MWV0P2Z62B R902288217 Hydraulic Motor for Original Rexroth Mixer Trucks combine Harvesters, A6VM Motor, A6VM140HA1T Motor
