How to read the pressure - flow characteristic curve of the A20VO Pump?

Dec 19, 2025

Leave a message

Emily Wang
Emily Wang
Marketing & Brand Manager at Hangzhou Pinxin Hydraulic Technology Co., Ltd. Emily leads the company's global marketing strategies and brand building initiatives, focusing on expanding market presence through innovative campaigns and partnerships.

Hey there! As a supplier of A20VO Pumps, I often get asked about how to read the pressure - flow characteristic curve of these pumps. It's a crucial skill, especially if you're in the business of using or selling these pumps. So, let's dive right in and break it down step by step.

What is the Pressure - Flow Characteristic Curve?

First off, the pressure - flow characteristic curve is like a map for your A20VO Pump. It shows the relationship between the pressure the pump can generate and the flow rate it can deliver. In simple terms, it tells you how much fluid the pump can push out at different levels of pressure. This curve is super important because it helps you figure out if the pump is suitable for your specific application.

Understanding the Axes

The curve is usually plotted on a graph with two axes. The horizontal axis represents the flow rate, usually measured in liters per minute (L/min) or gallons per minute (GPM). The vertical axis represents the pressure, typically measured in bars or pounds per square inch (PSI).

When you look at the curve, you'll notice that as the pressure increases, the flow rate usually decreases. This is because the pump has to work harder to push the fluid against a higher pressure, so it can't push out as much fluid in the same amount of time.

Interpreting the Curve

Let's take a closer look at how to interpret the curve. There are a few key points and regions that you need to pay attention to.

The No - Load Point

The no - load point is where the pressure is zero. At this point, the pump can deliver its maximum flow rate. This is the theoretical maximum amount of fluid the pump can push out when there's no resistance. It's a good starting point to understand the pump's capabilities.

The Shut - Off Point

The shut - off point is where the flow rate is zero. This happens when the pressure is so high that the pump can't push any fluid through the system. It's like trying to push water through a completely blocked pipe. The pressure at the shut - off point is the maximum pressure the pump can generate.

The Operating Range

The operating range is the area between the no - load point and the shut - off point. This is where the pump is designed to work most efficiently. You want to make sure that your application's pressure and flow requirements fall within this range. If you operate the pump outside of this range, it may not work properly or could even get damaged.

Factors Affecting the Curve

There are a few factors that can affect the shape and position of the pressure - flow characteristic curve.

Viscosity of the Fluid

The viscosity of the fluid being pumped plays a big role. Thicker fluids, like oil with a high viscosity, are harder to pump than thinner fluids. This means that the pump may not be able to deliver as high a flow rate at the same pressure when pumping a thick fluid compared to a thin one.

Pump Speed

The speed at which the pump is running also affects the curve. A faster - running pump can usually deliver a higher flow rate at the same pressure. However, increasing the pump speed too much can also cause problems, such as increased wear and tear on the pump components.

System Resistance

The resistance in the system, such as the length and diameter of the pipes, the number of valves, and the type of fittings, can also impact the curve. A system with high resistance will require the pump to generate more pressure to maintain the same flow rate.

Why It Matters for Your Application

Understanding the pressure - flow characteristic curve is essential for choosing the right A20VO Pump for your application. For example, if you're using the pump in a hydraulic system for a construction machine, you need to make sure that the pump can deliver the required flow rate at the pressure needed to operate the machine's hydraulic cylinders.

If you choose a pump that can't deliver enough flow or pressure, the machine may not work properly. On the other hand, if you choose a pump that's too powerful, you'll be wasting energy and money.

Related Products

We also offer other high - quality hydraulic pumps, such as the A11VO60LRDS/10R - NSC12K02 Hydraulic Piston Pump for Rexroth Concrete Pump Truck, the A8VO107LA1KS/63R1 - NZG05F074 Hydraulic Pump of Rexroth for Rotary Drilling Engineering Machinery, and the A11VO60LRDS/10R - NSC12K02 Hydraulic Pump of Rexroth for Walking Machinery in Stock. These pumps also have their own pressure - flow characteristic curves, and the same principles apply when reading them.

Conclusion

Reading the pressure - flow characteristic curve of the A20VO Pump is a valuable skill that can help you make informed decisions when it comes to choosing and operating the pump. By understanding the curve, you can ensure that the pump is a good fit for your application, which will save you time, money, and headaches in the long run.

_20240821110110A11VO60LRDS10R-NSC12K02 (6)

If you're in the market for an A20VO Pump or any of our other hydraulic pumps, don't hesitate to reach out. We're here to help you find the right pump for your needs and can provide you with all the technical information you need. Let's start a conversation about your requirements and see how we can work together to get the job done right.

References

  • "Hydraulic Pump Handbook" - A comprehensive guide on hydraulic pumps and their operation.
  • Manufacturer's documentation for A20VO Pumps, which provides detailed information on the pressure - flow characteristic curves.
Send Inquiry
Send Inquiry