In order to reasonably select the sealing device, it is necessary to be familiar with the form and characteristics of various sealing devices, the characteristics of sealing materials and the use conditions of the sealing device, such as the size of the working pressure, the temperature of the working environment, and the speed of the moving part. Comparing the actual conditions of use with the allowable conditions of the seal, it is necessary to ensure that the seal device has good sealing performance and long service life.
The parts should be designed with a guide Angle to avoid damage to the seals during assembly. When the sealing ring is assembled in the part with sharp edge and groove, the protective sleeve should be used to avoid damage to the seal. The hydraulic line should be set so that the distance between the tank and the actuator is as short as possible to reduce pressure loss and friction. In the hydraulic system, the pipe joint should be reduced as far as possible, and 30% to 40% of the system oil leakage is from the pipe joint.
The oil temperature is too high, the lubricating oil film is thinner, the friction is increased, the wear is increased, the sealing material is aging faster, making it hard and brittle, and may soon lead to leakage. The control of the temperature rise of the hydraulic system is generally started from the design of the fuel tank and the setting of the hydraulic pipeline.
