Solid impurities can be prevented from invading the system in the following ways:
First, when refueling
The hydraulic oil must be filtered and filled, and the refueling tool should be reliably clean. The filter at the filling port of the hydraulic tank cannot be removed in order to increase the refueling speed. Oiler personnel should use clean gloves and overalls to prevent solid impurities and fiber impurities from falling into the oil.

Two, maintenance
Remove the hydraulic oil tank refueling cover, filter cover, detection hole, hydraulic tubing and other parts, resulting in the exposure of the system oil passage to avoid dust, disassembly parts should be thoroughly cleaned before opening. When you need to use a wiping material and hammer, you should choose a wiping material that does not remove fiber impurities and a special hammer with rubber attached to the impact surface. The hydraulic components should be carefully cleaned, the filter should be cleaned at the same time when the oil is changed, and the cleaning material should be used to carefully clean the bottom of the filter shell before the installation of the filter element.
