D1P160 High Power Piston Pump – 160cc
Up to 400 L/min in the same SAE D envelope as the D1P130 and D1P145.
Danfoss introduced the 160 cm³ D1P160 to close the flow gap between the 145 and 193 sizes, and the pump delivers up to 400 L/min from a 2,500 rpm input - positioned by Danfoss as the most power-dense 160 cc pump on the market.
Because it shares the SAE D envelope of the D1P130 and D1P145, machine builders can step up displacement without redesigning the pump compartment. Control options include electronic displacement control with manual override, MTC, load sensing and pressure compensation, keeping the new size easy to tune into existing architectures.
| Maximum displacement | 160 cm³/rev [9.76 in³] |
| Working / peak pressure | 350 bar [5,076 psi] / 400 bar [5,802 psi] |
| Continuous speed | 2,200 rpm standard / 2,500 rpm with impeller |
| Theoretical flow | 352 L/min [93 US gal/min] / 400 L/min [106 US gal/min] boosted |
| Mounting flange | SAE J744 152-4 (SAE D), same as D1P130/145 |
| Input shaft | DIN 5480 W50 spline |
| Approximate weight | 68–74 kg [150–163 lb] by build |
160 cm³ addresses the demand step between mid and heavy displacement classes.
400 L/min from a D-frame pump keeps installation size down.
Drops into the mounting geometry proven on D1P130/145 machines.
EDC with manual override plus MTC, LS and PC cover new and legacy machines.
Danfoss Power Solutions added the 160 cm³ size to the D1P portfolio in October 2024 to serve applications between the 145 and 193 cm³ classes.
2. Does it fit where a D1P145 is installed?The 160 cm³ pump shares the SAE D envelope of the D1P130 and D1P145. Mounting geometry is consistent; porting and coupling should be verified for each machine.
3. What flow does it produce?Theoretical flow reaches 352 L/min in standard form and up to 400 L/min at 2,500 rpm with the impeller-boosted build.
4. Which controls are available on the new size?Electronic displacement control with manual override, mechanical torque control, load sensing and pressure compensation are all offered, matching the family control platform.
5. Is it a good upgrade for an older machine?For machines already on the 130/145 envelope it is a candidate - the displacement gain comes without a frame change, but the full circuit review should be done first.
6. Why is configuration advice important for this size?Because the size is recent, application data is still accumulating. Matching control, boost and shaft options to your duty cycle avoids rework on a new build.
7. Can it run with PVG 128/256 valves?Yes. The D1P family is engineered for PVG 128/256 spool valves, giving precise machine movement across the 160's full flow range.
8. What should I send for a quotation?Send the target flow, working pressure, duty cycle and, if available, your current pump part number - we will recommend the build and confirm availability.
Hot Tags: d1p160 danfoss high power piston pump 160cc – 400 l/min flow, China d1p160 danfoss high power piston pump 160cc – 400 l/min flow manufacturers, suppliers, factory, 90R Pump, Danfoss Series 90M Pump, ERR Pump, FRR Pump, H1P Pump, PVH Pump
